Divided parts tray
A six-pocket tray for screws, beads, and small parts.
From $17.83Customizable
Loading prints…
Made to measure
Set the dimensions and preview the model in 3D before you order.
64 prints
Desk-edge cable comb
Keeps cables neatly spaced along a desk edge.
From $8.00Customizable
Drawer-divider foot
Holds a drawer divider board upright.
From $8.00Customizable
Divider fit test piece
A small test print for checking divider slot fit.
From $8.00Customizable
Phone stand
A simple angled stand for a phone at your desk.
From $17.06Customizable
Corner square
A right-angle square for setting up corners and clamps.
From $8.00Customizable
Handle marking jig
Marks cabinet handle holes in the same spot every time.
From $8.27Customizable
Tube squeezer
Gets the last bit out of toothpaste and paint tubes.
From $8.00Customizable
Soap-dish catch tray
The catch tray for a two-part draining soap dish.
From $10.26Customizable
Soap-dish draining insert
A slotted insert that lets soap drain and dry.
From $8.00Customizable
Leaning label stand
A small leaning stand for labels and price cards.
From $8.00Customizable
Painting pyramid
Props up parts while paint or finish dries.
From $8.00Customizable
Cord winder
Wraps up earbuds and short cables.
From $8.00Customizable
Hex-bit rack
Holds eighteen hex driver bits upright.
From $8.00Customizable
Hex-bit fit test piece
A test print for finding the right bit socket size.
From $8.00Customizable
Hand sanding block
A comfortable block that clamps sandpaper in place.
From $11.36Customizable
Sanding wedge
Locks sandpaper into the hand sanding block.
From $8.00Customizable
Desk cable grommet
Finishes a cable hole through a desktop.
From $8.00Customizable
Corner-radius template
Traces rounded corners at four sizes.
From $8.00Customizable
Center-finding jig
Finds the center of a board in one step.
From $8.00Customizable
Brush rest and catch tray
Rests brushes between coats and catches drips.
From $14.46Customizable
Utility peg
A general-purpose peg for hanging tools and cords.
From $8.00Customizable
Sliding-lid box
A small storage box with a slide-in lid.
From $13.80Customizable
Sliding lid
The slide-in lid for the sliding-lid box.
From $8.00Customizable
Sliding-lid fit test: rail
A short rail sample for testing lid fit.
From $8.00Customizable
Sliding-lid fit test: slider
The matching slider for the lid fit test.
From $8.00Customizable
Round-stock cradle
Holds dowels and pipe steady for marking and drilling.
From $11.22Customizable
Cable-tie anchor
An anchor point for routing cables with zip ties.
From $8.00Customizable
Workshop funnel
A small funnel for oils, fluids, and fine powders.
From $8.00Customizable
Bag clip
A flexible clip that keeps folded bags closed.
From $8.00Customizable
Cord clip
A snap-in clip that holds a cord in place.
From $8.00Customizable
Hex-nut hand knob
Turns a hex nut or bolt into a finger-tight knob.
From $8.00Customizable
Slotted spacing shim
A slotted shim for spacing and leveling.
From $8.00Customizable
90°/45° marking saddle
Marks square and 45° lines around a board.
From $8.00Customizable
Roll-core adapter
Fits a roll onto an axle or rod.
From $8.00Customizable
Braced bookend
A sturdy bookend with a broad foot.
From $15.54Customizable
Corner cable guide
Routes a cable neatly around a corner.
From $8.00Customizable
Small-parts scoop
Scoops and pours screws and small parts.
From $8.00Customizable
Blank plant marker
A blank marker for labeling plants and seed trays.
From $8.00Customizable
Ruler stop
A sliding stop for repeat measurements on a ruler.
From $8.00Customizable
Ruler-stop wedge
Locks the ruler stop in place.
From $8.00Customizable
Smooth-tube reducer
Connects two tubes of different sizes.
From $8.53Customizable
Tube reducer fit ring
A quick test print for checking tube fit.
From $8.00Customizable
Strap-clamp corner pad
Corner pads for gluing up frames with a strap clamp.
From $8.00Customizable
Small-parts sorting sieve
Sifts small parts from dust and debris.
From $8.48Customizable
Sieve hole test piece
A test print for choosing the right sieve hole size.
From $8.00Customizable
Modular divider joint
Joins divider boards in cross, T, corner, or straight layouts.
From $8.00Customizable
Soap dish kit
A draining soap dish: catch tray plus slotted insert.
From $13.97Kit
Sanding block kit
A sanding block with two wedges that clamp the paper.
From $12.47Kit
Sliding box kit
A box with a slide-in lid, plus a lid fit test.
From $21.01Kit
Ruler stop kit
A sliding stop and locking wedge for repeat measuring.
From $8.00Kit
Strap clamp kit
Four corner pads for gluing up frames.
From $10.21Kit
Divider joint kit
A cross joint for building drawer dividers.
From $8.00Kit
Bathroom corner shelf
A draining corner shelf that stacks on a single rod.
From $21.54Customizable
Bathroom corner shelf — rock texture
The corner shelf with a stone-textured surface.
From $22.63Customizable
Bathroom shelf rod spacer
A 62 mm spacer between corner-shelf tiers.
From $8.00Customizable
Bathroom shelf top cap
Finishes the top of the corner-shelf rod.
From $8.00Customizable
Magnetic fridge cup
A magnet-mounted cup for pens, clips, and odds and ends.
From $12.25Customizable
Magnetic fridge cup — wide
A wider version of the magnetic fridge cup.
From $16.32Customizable
Longboard wall holder bracket
A wall bracket for displaying a longboard.
From $11.51Customizable
Snap-on microphone desk mount
Snaps onto a desk edge and holds a microphone.
From $10.71Customizable
Drop-rest housing (prototype)
A small prototype housing part, 15 × 15 × 7 mm.
From $8.00Customizable
Pedalboard rod triangle
Holds three 8 mm rods to build a pedalboard frame.
From $12.74Customizable
Pedalboard triangle — chamfered
A chamfered variant of the pedalboard rod triangle.
From $21.83Customizable