
Custom Catan border segment
A plain geometric border segment with a recessed center and optional end sockets.
From $8.00Customizable

Loading 3D preview…
Download not available
View CAD sourceBambu A1 · Fits the 256 mm bed
Place the broad, flat face on the bed. No supports needed. The store reserves an 11 mm bed margin.
Check the dimensions of your cards or tiles before ordering.
Fit measured sleeves and loose deck stacks, with optional independent sizes and deck counts in two opposing rows. Open finger access; original tray remains available.
Measure sleeves and the full stack
Measure the widest outside sleeve seams and its full outside length. A package size may describe the card it holds. Stack the largest complete deck loosely, including expansion cards, and measure its thickness without squeezing out the air.
Choose Measured sleeves and deck stack under Tray sizing. By default every bay uses that sleeve size and tallest stack allowance. For two rows, you can choose Measure the back row separately for different sleeve sizes, stacks or deck counts. Presets are measured examples, with no edition fit or card-count promise.
One open play tray per quantity. Use on a level table; open ends do not retain cards for transport. Smooth contact edges before use. Cards and sleeves are separate. Physical print and fit testing are pending.
One open inclined card tray per quantity. Measured-deck mode uses actual outside sleeve width and length and the tallest complete loosely stacked deck thickness. Measure sleeve seams rather than relying on a package label, and do not compress air from the stack. Choose one to four decks per row and one or two opposing rows. By default all bays share the same measurements. With two rows, choose Measure the back row separately to give the back row its own sleeve width, sleeve length, stack allowance and deck count. All bays within each row share that row's measurements; this does not set individual bays independently. Front is the bottom of the live top view and back is the top. Each row is centered on the wider tray, with spare width outside the narrower row. The tilted footprint includes sleeve length and the horizontal projection of stack thickness. Side walls follow each row's ramp, 2 mm above its calculated stack envelope. A continuous shared center stop spans the wider row and rises to the taller stack's required height. Open outer ends and finger windows give access to the last card. Finished bay widths and footprints include the shared total clearance. Live top and side measurement diagrams, local browser CAD, matching STL export and material-volume/surface pricing follow the configuration; checkout repeats validation and pricing. The complete tray, including both different row footprints, must fit the 245 mm usable envelope inside the Bambu A1 256 mm bed. Original tray, tall tray, equal-row measured mode and manual sizing remain available. PLA or PETG, 30% infill and 0.4 mm nozzle; print flat bases down, inclined rails and walls up, without supports. Smooth sleeve-contact edges and clear stringing before use. Check that each displayed finger opening suits your hands. For level tabletop play; open ends do not retain cards for transport. This is not a fitted box insert and no box fit, card count or edition compatibility is promised. Cards and sleeves are separate. Physical print and fit testing are pending. Presets are measured examples, not guaranteed fits. Independent accessory; not an official CATAN product.